Thingiverse
Evergreen Spiral Vase
por MetroidSlayer
25
Descargas
18
Likes
0
Makes
Simple tabletop evergreen tree that can be printed in spiral/vase mode. This is my first attempt at using manipulating surfaces in the Form tool. The results are 100% exactly what I envisioned, which is a success in my book!
- The models that end in "b" have bases on them for easy printing. Most slicers should include these without issue, but use the "a" files if not.
- Recommend 0.4-0.45mm extrusion width. This will make each fin two passes thick; quite rigid for a spiral print.
- I do not recommend scaling the object down, as it may result in slicing errors. Scaling up should be okay.
- WIP! I still need to make a test print. I may update the model based on my results.
- Bonus: I've included a print that cannot be printed in spiral/vase mode (EvergreenLat01). I made it by accident, but it looked too cool to throw out.
- The models that end in "b" have bases on them for easy printing. Most slicers should include these without issue, but use the "a" files if not.
- Recommend 0.4-0.45mm extrusion width. This will make each fin two passes thick; quite rigid for a spiral print.
- I do not recommend scaling the object down, as it may result in slicing errors. Scaling up should be okay.
- WIP! I still need to make a test print. I may update the model based on my results.
- Bonus: I've included a print that cannot be printed in spiral/vase mode (EvergreenLat01). I made it by accident, but it looked too cool to throw out.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
