Evil Easter Bunny Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1 #0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #ff5869 PLA BambuLab Basic Pink Transmission Distance: 8 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Indigo Purple At layer #11 (0.96mm) swap to Cobalt Blue At layer #16 (1.36mm) swap to Pink At layer #20 (1.68mm) swap to Red At layer #22 (1.84mm) swap to Yellow At layer #24 (2mm) swap to White for the rest.