Thingiverse
EX-CSB1 Full Case
door DCC-EX
24
Downloads
33
Likes
2
Makes
**DCC-EX** is a team of dedicated enthusiasts producing open source DCC & DC solutions for you to run your complete model railroad layout. Our easy to use, do-it-yourself, and free open source products run on off-the-shelf Arduino and our custom technology and are supported by numerous third party hardware and apps like JMRI, Engine Driver, wiThrottle, Rocrail and more.
**This is a full case for the EX-CSB1 Command Station Booster** consisting of a bottom to hold the PCB and a top cover that snaps on to protect the board. The bottom has tabs to hold the PCB so **no screws are required, but you may want to use M2 self-threading or machine screws to firmly hold the board** if you are going to do a lot of cable plugging and unplugging. The top snap fits onto the bottom and has cooling holes and an opening for the 1.3" OLED display.
There are 2 versions of both the top and the bottom:
* Bottom with tabs for M3 screws to mount using spacers to the layout
* Bottom without tabs fo
**This is a full case for the EX-CSB1 Command Station Booster** consisting of a bottom to hold the PCB and a top cover that snaps on to protect the board. The bottom has tabs to hold the PCB so **no screws are required, but you may want to use M2 self-threading or machine screws to firmly hold the board** if you are going to do a lot of cable plugging and unplugging. The top snap fits onto the bottom and has cooling holes and an opening for the 1.3" OLED display.
There are 2 versions of both the top and the bottom:
* Bottom with tabs for M3 screws to mount using spacers to the layout
* Bottom without tabs fo
DCC-EX publiceert ook op
1 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
