ExoGuitar - Nut

This is the basic nut for the ExoGuitar system. Use this nut model if the Head print profile doesn't include a nut. This is designed to be compatible with Neck v3, and is thicker than the nuts used on Neck v2 as Neck v3 is thicker. How to Install / UseThe ExoGuitar nut does NOT rest against the head. In between them is a set of adjustment screws. These screws push the back of the nut. Here is documentation for how to install these screws. Step 1: Install Heat Set InsertsStep 2: Install Adjustment ScrewsMake sure that the Hex on the Grub Screw is facing the back of the neck so you can adjust it with the Nut in place. Step 3: Install NutWhen putting the strings on the guitar, sandwich the Nut in-between the strings and the screws. Step 4: TuneUsing a 1.5mm allen key from the back of the neck, tighten the Grub Screws until the strings are the correct distance from the frets. This will be when they don't buzz on the frets when the string is plucked, as close to the frets as possibl