Expandable LED Wall Mountable Work Light

An expandable lighting system that allows you to place several lamps over a work area.

Print the Lamp Arm and holder out... One each for every lamp you wish to create. Glue the 2 pieces together using a bit of superglue. Add heatsink with chosen LED to the lamp fixture. Run wires inside the lamp arm and solder to the LED.

Mount the lights onto the wall using 2 screws for each lamp. I used 2" drywall screws.

Heatsink Used:
https://www.digikey.com/product-search/en?keywords=345-1072-nd

Any Star Type LED will work... I used a 3W LED for each lamp.

I epoxied the LEDs to the heatsink using arctic silver thermal epoxy, and then soldered the 4 of them in parallel.

My LEDs are rated @ 3.6V... I purchased a 3V 2Amp power inverter and it is plenty to power the 4 LEDs. Purchase an inverter proportionally for the size and number of LEDs you are using.

I added a switch which you can see in one of the pictures. Print the "switch" housing out and glue it onto the base o