EYE PEEKING HUEFORGE

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 129.07x235mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.6mm and the Actual Depth is 2.2mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Sunny Orange Transmission Distance: 8 PLA+ Sunlu White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #14 (1.2mm) swap to Grey At layer #15 (1.28mm) swap to Sunny Orange At layer #19 (1.6mm) swap to White for the rest.