Thingiverse
EZ NES Cartridge
por ABranchTooFar
9
Descargas
3
Likes
0
Makes
I designed this NES cartridge to help with my game development on real hardware. With this, PCBs like the ReproX or NES Breakout Cartridge can be easily used on real hardware.
My design goals were for this to be:
- Easy to print
- Easy to insert/remove from a front-loader NES
- Easy to change/access the PCB and ROM chips
The openSCAD code can be found on my GitHub [here](https://github.com/ABranchTooFar/3D-Stuff/tree/main/EZ%20NES%20Cartridge).
**NOTE:** I found that ReproX PCBs with IC sockets for the ROM chips can be a tight fit in a front-loading NES cartridge. The variable `$pcbThickness` can be increased in the openSCAD file to add more head room, but I left the PCB thickness as measured because I was concerned that a lower PCB position *could* potentially bend the console's connector pins.
My design goals were for this to be:
- Easy to print
- Easy to insert/remove from a front-loader NES
- Easy to change/access the PCB and ROM chips
The openSCAD code can be found on my GitHub [here](https://github.com/ABranchTooFar/3D-Stuff/tree/main/EZ%20NES%20Cartridge).
**NOTE:** I found that ReproX PCBs with IC sockets for the ROM chips can be a tight fit in a front-loading NES cartridge. The variable `$pcbThickness` can be increased in the openSCAD file to add more head room, but I left the PCB thickness as measured because I was concerned that a lower PCB position *could* potentially bend the console's connector pins.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
