Thingiverse
EZVIZ DB1C mount
por dezign81
2
Descargas
0
Likes
0
Makes
After installing my EZVIZ DB1C video doorbell it was too close to the wall and the wall reflected the IR light which resulted in a big white part on the recording.
To avoid this I designed, printed and installed this mount which positions the doorbell a few centimeters to the front so that the wall is not in the picture anymore.
The two small holes line up with the original bracket supplied with the doorbell. I used simple 3x20mm wood screws to fix the bracket on the mount and somewhat bigger screws to fix the mount itself on the frame of the door.
Printed in PETG with 3 perimeters and 10% infill.
Designed in Tinkercad: https://www.tinkercad.com/things/cMJKXVr4sIe
To avoid this I designed, printed and installed this mount which positions the doorbell a few centimeters to the front so that the wall is not in the picture anymore.
The two small holes line up with the original bracket supplied with the doorbell. I used simple 3x20mm wood screws to fix the bracket on the mount and somewhat bigger screws to fix the mount itself on the frame of the door.
Printed in PETG with 3 perimeters and 10% infill.
Designed in Tinkercad: https://www.tinkercad.com/things/cMJKXVr4sIe
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
