Ezystorage 18L Dry box

This is a drybox using an Australian Ezystorage 18L. These boxes are like $15 from bunnings. It fits 3 rolls easily but you could probably squeeze in 4. Once you print this, use the threaded rod roller system from the IKEA 22L Dry box (https://makerworld.com/models/70801) it will just snap in. As per his design, you’ll need to buy the usual 608 bearings if you want it to run smooth or print PLA ones if you are cheap and don’t mind it having a little rumble. Bearings are cheap online but can also be grabbed at Jaycar in 10 packs for like $13. You'll also need a threaded 8mm rod. Bunnings has these for like $8 for 1.2m. You need to cut it to 32cm lengths. For the outlet grommet I suggest this if you don’t have PTFE Quick-Connects https://makerworld.com/models/501091 For the filament labels I just printed these on a Avery label sheet on my paper printer and stuck them on. For the desiccant I have a couple of boxes for the sides and I’m using a mesh bag under the rolls in the middle. T