Slicer Discord
F-102 Plane kit card – 3D-printbaar model van MakerWorld MakerWorld
Other Miniatures

F-102 Plane kit card

31 Downloads
28 Likes
16 Makes
Model downloaden
My 3rd kit card aircraft The Convair F102 Delta Dart was a American interceptor opearated in the 1960s-1970s, notable for being the first supersonic and the first delta wing aircraft in the USAF's arsenal. The aircraft was also one of the only aircraft capable of launching air to air nuclear weapons.Boost MeBoost if you like my stuff, it helps a ton The aircraft modeled here is based on the jets flown by the 115th fighter squadron of the Wisconsin Air National Guard. The model is about 125mm long and takes a bit less than 3 hours to print, it uses the same stand as my Su 27 model. The model uses 4 colors, I used Pla in black, white, silver, and red. To get a black and silver jet you can set the red and white to silver, it wont affect any details, just the tail and wing tip colors. If you experience any fitment issues please comment and i will fix any issues if they arise. If you do a remix, please leave a link in the comments.
Categorie
Other Miniatures
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Gemiddelde betrouwbaarheid
Waarom?
supports nodig · 4 kleuren
Eendelig Supports vereist 4 kleuren / AMS
Supports 2/3
Montage 0/3
Instellingen 3/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Kleuren
4 (AMS/MMU aanbevolen)
Geschatte printtijd
3 h
Software
Cura, PrusaSlicer of vergelijkbaar
Veelgestelde vragen
Heeft F-102 Plane kit card supports nodig bij het printen?
Ja, F-102 Plane kit card heeft waarschijnlijk supports nodig vanwege overhangen en geometrie. We raden boom-supports in je slicer aan voor makkelijker verwijderen. Schakel supports in in Cura, PrusaSlicer of Bambu Studio vóór het printen.
Hoe lang duurt het om F-102 Plane kit card te printen?
Volgens de ontwerpaantekeningen duurt F-102 Plane kit card ongeveer 3 uur om te printen bij standaardinstellingen (laaghoogte 0,2 mm, vulling 15 %). De werkelijke printtijd varieert op basis van printersnelheid, laaghoogte en vullingsdichtheid.
In welk bestandsformaat is F-102 Plane kit card beschikbaar?
F-102 Plane kit card is beschikbaar in het formaat STL. Deze bestanden kunnen worden geopend en geslicet met gratis software zoals Cura, PrusaSlicer, Bambu Studio of OrcaSlicer voor FDM-printen, of ChiTuBox en Lychee Slicer voor resin-printen. De download wordt aangeboden via MakerWorld.
Is F-102 Plane kit card gratis te downloaden?
Ja, F-102 Plane kit card is gratis te downloaden via MakerWorld. Controleer altijd de licentie op het oorspronkelijke platform om commercieel gebruik, remixen en naamsvermelding te begrijpen.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie