F-22 Raptor Hueforge

HueForge of an F-22 Raptor. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mmFilaments Used: #00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #84754e PLA BambuLab Basic Bronze Transmission Distance: 1 #8e9089 PLA BambuLab Basic Gray Transmission Distance: 2 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filamentsSwap Instructions: Start with Turquoise At layer #4 (0.4mm) swap to Blue At layer #12 (1.04mm) swap to Black At layer #13 (1.12mm) swap to Blue Gray At layer #17 (1.44mm) swap to Bronze At laye