Slicer Discord
F1 Monza circuit display stand – 3D-Druckmodell von MakerWorld MakerWorld
Decor

F1 Monza circuit display stand

von RJota3D · Decor
172 Downloads
182 Likes
49 Makes
Zum Modell
COLOR ORDER: The first four colours that you are going to use are:⚫ Black🟢 Green🟡 Yellow🔵 Blue Then, during the color change pause, you must swap the colors from:⚫ Black → 🔴Red🟢 Green → ⚪ White - - - ⚠️ IMPORTANT ⚠️ - - -Before printing the track, you must set the BLACK - RED and the GREEN - WHITE to the same spool, as shown in the picture below. (If black is set on the A1 spool, the red must be set in the A1 spool as well)(Same for the GREEN - WHITE, if green is set in the A2 spool, white must be set on the A2 spool)Once the AMS is set correctly, you can continue to print. 🕜 Wait until the color change pause (Already set on the print profile, on layer 26) ⬐ SPOOL SWAPS ⬎⏸️ Once the print is paused, follow the next steps:SWAP FROM BLACK TO RED: Manually press the filament cutter lever on the extruder to cut the black filament.In the printer screen, go to control, and in the extruder, press the TOP BUTTON 4 or 5 times to take off the black filament from the extruder gear.Then, gen
Kategorie
Decor
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Warum?
2 Farben
Einteilig 2 Farben / AMS
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Farben
2 (AMS/MMU empfohlen)
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen