F1 skadis holder

Simple low filament holder for the bburago 1/43 F1 cars that you can get at Costco Canada that uses a singular M3 screw. To use, simply take a M3 screw and assemble the holder like in the following photo, I used a 20mm but you could probably use a 10mm. From there simply slot it into one of the skadis holes, and screw so that the holder feels like it's solidly on. Keep in mind that for it to screw properly you need to be pulling the back T-Nut against the board. I like just pulling down from the top of the holder, as that seems to work quite well.The only difference between the top and bottom versions is where the wheel holders come out from. The alignment guide comes from: https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegbThe adapted M3 T-nut comes from: https://makerworld.com/en/models/34983-skadis-m3-t-nuts-mounting-no-m3-nuts-or-tapping-ne?from=search#profileId-34512 - They also have presets for printing multiple T-nuts at a time I've