F1 Spa Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170.94x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.3mm and the Actual Depth is 2.4mmFilaments Used:PETG GEEETECH Black Transmission Distance: 0.3PETG BambuLab Basic Gray Transmission Distance: 3PETG GEEETECH Black Transmission Distance: 1PETG GEEETECH White Transmission Distance: 5PETG Sunlu Red Transmission Distance: 7.5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to GrayAt layer #11 (0.96mm) swap to BlackAt layer #14 (1.2mm) swap to WhiteAt layer #18 (1.52mm) swap to BlackAt layer #24 (2mm) swap to Red for the rest. There is a warning about floating regions in the Bambu Studio. This warning can be ignored.