F22 Fighter Jet Hueforge

by steeno3D · Hueforge & Lithophane

117 Downloads

23 Likes

23 Makes

Jet firing missiles. Enjoy! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200.01x200.01mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.9mm and the Actual Depth is 3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Overture Orange Transmission Distance: 7.1 PLA Overture Highlight Yellow Transmission Distance: 6 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Orange At layer #20 (1.68mm) swap to Highlight Yellow At layer #30 (2.48mm) swap to White for the rest.