Face cover - my version (v04)

My version of face cover inspired by https://cults3d.com/en/3d-model/tool/face-cover-covid-19.

Best when printed with PET-G but works also with ABS or PLA.

Main features:
- you can use any transparent foil (also A4),
- it can handle max 303x216mm glass made from laminating pouches (tried with 100um) - vertically and horizontally,
- handle/hole for rubber (belt, rope, etc),
- foil can be secured only by squezing (use 3x Zatrzask_vXX.stl),
- foil can be secured by two (or more) holes (fi 5mm) - made with standard puncher (2x Blokada_vXX.stl) or as you like,
- or secured by holes and squezing,
- there is a groove to secure latches,
- construction is compact so parts can be stacked on printer table.


Print settings (for nozzle 0.4mm):
- layer 0.25,
- top/bottom layers - none,
- 3 outlines,
- 0% infill.


Commercial use is forbidden.
If your english is bad, it means: NO COMMERCIAL