Thingiverse

FACE MASK

by PENBERIC

22 Downloads

23 Likes

0 Makes

Covid19 mark. For test use only!! Work in progress to adapt different filter models.

Flexible piece.
Filaflex 95A, 5% infill, 2 perimeters, 0.2mm layers, without supports.
4h aprox.

Rigid piece.
Pla, 10% infill, 2 perimeters, 0.2mm layers, without supports if you can do bridges with your FDM printer, if not, 1mm 45º supports are needed.
46min aprox.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports · 0.20mm layers

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Layer height

0.2 mm

Est. print time

4 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does FACE MASK need supports when printing?

No supports needed for FACE MASK — it's designed to print clean off the bed.

How long does it take to print FACE MASK?

According to the design notes, FACE MASK takes approximately 4 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is FACE MASK available in?

FACE MASK is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is FACE MASK free to download?

Yes, FACE MASK is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

FACE MASK

Similar Models

Add to Collection