Facehugger

Just a little face hugging pet :) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 132.61x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA 3dpower black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Prima Value Light gray Transmission Distance: 5 PLA Filafarm White Transmission Distance: 1This print uses 4 unique filaments Swap Instructions: Start with black At layer #8 (0.72mm) swap to Blue Gray At layer #12 (1.04mm) swap to Light gray At layer #20 (1.68mm) swap to White for the rest.