Faceting lap case thin

These are a revised lap case of the original. Side and top thickness is 3mm but bottom thickness has been made thicker to 5mm. It also has a cut out and recess on the base to help assist with getting the lap out to try counter contamination by fingers.
There are 4 sizes of laps with a inner diameter of 154mm x 12mm, 154mm x 19mm, 206mm x 12mm and 206mm x 20mm

Print and use is at your own risk (disclaimer)

The lid has been made with a 1-2mm gap between lid and base to allow for paint or a seal

Printing: use 50% infill