Falcon

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.56mmThe Max allowed Thickness is 1.84mm and the Actual Thickness is 1.83951mmFilaments Used:PLA ******+ Black Transmission Distance: 0.3PLA ****** + Gray Transmission Distance: 3PLA ****** + White Transmission Distance: 6This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to GrayAt layer #13 (1.12mm) swap to White for the rest.