Fallout Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 1.4mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA+ Sunlu Skin Transmission Distance: 5 Swap Instructions: Start with Black At layer #6 (0.56mm) swap to