Fallout Vault 18 sign

by ChainsawGraphics · Signs & Logos

37 Downloads

71 Likes

19 Makes

The print can be scaled up,.. however unclick uniform scale when sizing up as you do not want the Z height to change (layers and color changes will then not be correct and your print will not look correct.) Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x112.5mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3 PLA BambuLab Matte Dark Red Transmission Distance: 0.3 PLA BambuLab Glow Orange Transmission Distance: 5.3 PLA BambuLab Matte White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal Black At layer #22 (1mm) swap to Dark Red At layer #27 (1.2mm) swap to Orange At layer #44 (1.88mm) swap to White for the rest.