Thingiverse
Fan Duct
di vangalvin
15
Download
8
Likes
0
Makes
NOTE: The V5 STL is FIXED and now has the hole in the duct removed so you don't need to cut it out.
This was a Colaboration between myself and a friend in Fusion 360.
The joint between the fan duct and the outlet duct may need to be cut out with a dremel as I did not get the chance to remove it in the final after tweaking a few things. If i get the chance and inclination I may update it at some stage.
You also may need to measure and adjust the height to suite your printer. My outlet sits about 1mm above my nozzle.
The duct was designed to fit on this
http://www.thingiverse.com/thing:1511554
thanks jowjowjow for the base :) prints and works a treat!
This was a Colaboration between myself and a friend in Fusion 360.
The joint between the fan duct and the outlet duct may need to be cut out with a dremel as I did not get the chance to remove it in the final after tweaking a few things. If i get the chance and inclination I may update it at some stage.
You also may need to measure and adjust the height to suite your printer. My outlet sits about 1mm above my nozzle.
The duct was designed to fit on this
http://www.thingiverse.com/thing:1511554
thanks jowjowjow for the base :) prints and works a treat!
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!