Printables

Other House Equipment

Fan ducts

by Phil Bock · Other House Equipment

16 Downloads

1 Likes

0 Makes

Go to Model

Ducts to turn an axial fan into an airmover. Be warned: with supports the elbow takes about 20 hours to print.

thingiverse thingiverse

Category

Other House Equipment

Source

Printables

Published

21.02.2022

Updated

12.04.2022

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

20 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Fan ducts need supports when printing?

Yes, Fan ducts will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Fan ducts?

According to the design notes, Fan ducts takes approximately 20 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Fan ducts available in?

Fan ducts is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Printables.

Is Fan ducts free to download?

Yes, Fan ducts is available as a free download through Printables. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Fan ducts

Similar Models

Add to Collection