Ducts to turn an axial fan into an airmover. Be warned: with supports the elbow takes about 20 hours to print.
Source
Thingiverse
What you need to print this:IntermediateMedium confidence
Why?
supports needed
Single pieceSupports required
Supports2/3
Assembly0/3
Settings1/3
Bed size0/3
Post-process0/3
Printer
FDM / FFF
File format
STL
Material
Est. print time
20 h
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Does Fan ducts need supports when printing?
Yes, Fan ducts will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
How long does it take to print Fan ducts?
According to the design notes, Fan ducts takes approximately 20 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Fan ducts available in?
Fan ducts is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.
Is Fan ducts free to download?
Yes, Fan ducts is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
Did you print this model? Sign in and share your make!
Thingiverse