Fan mounts for Reach 3D Printer

Update: Made a new integrated fan and mount for the radial fan. This design is modified for a different set up (30x30mm fan) I am currently designing but since I never liked the original design I figured I'd share tjhis now in the interim. The way the radial fan mounts is you'll have to drill/tap for a m3 bolt to fit in the hole. You'll then want to grab a m3x25mm bolt, put a washer on it, then through the fan mounting hole, then another washer and a split washer. The split washer isn't necessary but I like the tension it adds. This design is meant to to swivel and snap into place. It will make more sense when the new assembly is made/released as to why the swivel is there. To mount the assembly, you'll squish it between the 40x40 fan and the sideFanv2 file. You'll want to use all 4 screws to mount it. It allows for z axis adjustment this way. I have the bottom of this mount about 20mm below the bottom face of the 40x40 mm. This should roughly direct the airflow to the tip of the nozzl