Thingiverse
Fancy Oscillating Fan - Fully Printed
door _AlexY
45
Downloads
40
Likes
0
Makes
Update 1/5/2021: Flipped motor and moved gear to front shaft section, attached rigidly against the front bearing. Motor noise has been reduced significantly. Switched out 20mm M3 screws to 15mm.
An oscillating desk fan, designed in Fusion 360. Everything is printed except for fasteners and electrical components. Optionally contains a rechargeable battery for completely portable operation.
Fusion 360 link: https://a360.co/3qBHxLy
Video: https://youtu.be/vgS1dX1ZaXw
Base materials:
|Item|Quantity|Notes|
|--|--|--|
|M3x10mm bolt, button head| 19||
|M3x15mm bolt, button head|4||
|M3 lock nut|17||
|130 size hobby motor|1| Currently using an 11.5k rpm@6v motor. Try to get one with stronger magnets for higher torque.|
|SPST Toggle switch, M6 thread|1||
|608 bearing|2||
|22awg or similar wires, heatshrink, etc.|Varies||
Rechargeable option:
For this option, print the regular bottom plate, as well as the base midplate. Do not print the non-rechargeable version of the bo
An oscillating desk fan, designed in Fusion 360. Everything is printed except for fasteners and electrical components. Optionally contains a rechargeable battery for completely portable operation.
Fusion 360 link: https://a360.co/3qBHxLy
Video: https://youtu.be/vgS1dX1ZaXw
Base materials:
|Item|Quantity|Notes|
|--|--|--|
|M3x10mm bolt, button head| 19||
|M3x15mm bolt, button head|4||
|M3 lock nut|17||
|130 size hobby motor|1| Currently using an 11.5k rpm@6v motor. Try to get one with stronger magnets for higher torque.|
|SPST Toggle switch, M6 thread|1||
|608 bearing|2||
|22awg or similar wires, heatshrink, etc.|Varies||
Rechargeable option:
For this option, print the regular bottom plate, as well as the base midplate. Do not print the non-rechargeable version of the bo
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
