Thingiverse
Fanless CM3588 NAS Case
von pixwert
12
Downloads
22
Likes
1
Makes
A case for CM3588 NAS board. Thanks to LMG for giving visibility to this great piece of hardware.
It comes with a lid and buttons. The button is a single file that should be printed 5 times to cover all 5 buttons that the CM3588 board comes with.
The buttons don't need springs or anything extra to work, just place them from the inside before inserting the board into the box (you might need to use some tape on the outside of the box while inserting the board to prevent the buttons from moving during the process, you can remove the tape after successfully inserting the board into the box).
It comes with a lid and buttons. The button is a single file that should be printed 5 times to cover all 5 buttons that the CM3588 board comes with.
The buttons don't need springs or anything extra to work, just place them from the inside before inserting the board into the box (you might need to use some tape on the outside of the box while inserting the board to prevent the buttons from moving during the process, you can remove the tape after successfully inserting the board into the box).
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
