Slicer Discord
Fantastic Planter "Spiral" version – 3D printable model from MakerWorld MakerWorld
Garden

Fantastic Planter "Spiral" version

128 Downloads
46 Likes
35 Makes
Go to Model
Introducing the Fantastic Planter "Spiral" version, a captivating work of art designed to bring nature's beauty into your space. The planter features gracefully spiraling vanes that lend an air of enchantment to its appearance. Embrace the fusion of artistic brilliance and practicality as you choose from three versatile sizes – small, medium, and large – to perfectly suit your surroundings. Elevate your botanical experience with the mesmerizing "Spiral" version, an extraordinary addition to any home or garden. 3 Versions are available. The Medium is shown in the picture. Please do a simple water test by filling with water and letting it sit for 2 hours before checking for leaks. Use a clear polymer sealer if you have any leaking but for most its not required. PRINTING TIPS: Prints without supports. Any reasonable layer height can be used.
Category
Garden
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Medium confidence
Why?
no supports
Support-free Single piece
Supports 0/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Est. print time
2 h
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Makers Mashup also publishes on

333 additional models across 2 more platforms

Verified by matching model titles across platforms.
Frequently Asked Questions
Does Fantastic Planter "Spiral" version need supports when printing?
No supports needed for Fantastic Planter "Spiral" version — it's designed to print clean off the bed.
How long does it take to print Fantastic Planter "Spiral" version?
According to the design notes, Fantastic Planter "Spiral" version takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Fantastic Planter "Spiral" version available in?
Fantastic Planter "Spiral" version is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Fantastic Planter "Spiral" version free to download?
Yes, Fantastic Planter "Spiral" version is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection