Fanttik T1 Max Gridfinity

This is a Gridfinity box designed for the Fanttik T1 Max soldering iron. The model takes up an area of 252 mm x 252 mm (6x6 Gridfinity). It would be possible to make it slightly smaller by using a 6x5.5 Gridfinity footprint, but I preferred not to, since this version provides more space for other items and a cleaner design. You could also reduce material by using less infill, but be careful: too little infill can cause poor layer adhesion and may require a full reprint. It’s better to use sufficient infill from the start for a strong and reliable print. I couldn’t make it officially available for the P1S, even though it works (I printed it on the P1S myself), but you’ll need to make some adjustments. To use the full build volume on a Bambu Lab P1S or X1C, please check the wiki article here:👉 Print Volume Limitations Wiki Here is a quick guide:You will also need this file to hold the cutter in place:wiki.bambulab.com/knowledge-sharing/print-volume-limitations/bambu_lab_printable_blocke