Faravahar Hueforge

Print at 15% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x150mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 3mm and the Actual Depth is 1.8mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA PolyLite Beige Transmission Distance: 1.5 This print uses 4 unique filaments Swap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Mandarin Orange At layer #11 (0.96mm) swap to Jade White At layer #18 (1.52mm) swap to Beige for the rest.