Slicer Discord
Fast Print HexMaille Fabric – Modèle 3D imprimable de MakerWorld MakerWorld
Other Art Models

Fast Print HexMaille Fabric

1.8k Téléchargements
323 Likes
1.3k Makes
Voir le modèle
Inspired by TurboDork's NASA Fabric, I redesigned it to be thinner, less finicky, and much faster to print. Each tile is about 12mm across the flats, and only 3mm thick. The design has no long, thin vertical sections, making it much sturdier that a lot of other maille designs.Most 3D printed maille fabrics use identical interlocking pieces. This design, however, uses hexagonal tiles and separate interlocking rings. The rings are printed right on top of the tiles (kind of like removable supports). They have minimal contact with the tiles below, so they are very easy to break free. I've included an 8x10 grid of tiles as well as a single tile and ring for inspection.Update: The original version prints with the tile surface against the bed, which gives a nicer, more uniform finish. I've also added a version where the tile prints as the top surface. The main advantage is that rings free up much more easily (just wiggle the fabric) due to the reduced contact area with the surface below.Print
Catégorie
Other Art Models
Source
MakerWorld
Publié
Mis à jour
Ce qu'il faut pour imprimer: Débutant Confiance faible
Monobloc
Supports 1/3
Assemblage 0/3
Réglages 1/3
Taille du plateau 0/3
Post-traitement 0/3
Imprimante
FDM / FFF
Format de fichier
STL
Matériau
ASA
Plateau min.
50 mm (Petit)
Logiciel
Cura, PrusaSlicer ou similaire
Même créateur, plus de plateformes

LoboCNC publie également sur

313 modèles supplémentaires sur 1 autres plateformes

Vérifié par correspondance des titres de modèles entre plateformes.
Pas encore d'évaluations
Pas encore de commentaires – soyez le premier !

Modèles similaires

6 Suggestions
Feed Blog Slicer Calculateur Recherche par image Soumettre Contact Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Ajouter à la collection