Slicer Discord
3DSEARCH / 3D Printer Accessories / Fast-print reusable spool AMS compatible V2
Fast-print reusable spool AMS compatible V2 – 3D printable model from MakerWorld MakerWorld
3D Printer Accessories

Fast-print reusable spool AMS compatible V2

by cortosis2009 · 3D Printer Accessories
181 Downloads
34 Likes
38 Makes
Go to Model
Per request, here's my V2 reusable filament spool. The biggest changes made here vs V1 is adding holes to help start and end the filament without needing tape or any clips. I have also changed the holes sizes for the two halves so they use m3 hardware. I recommend the button cap type as they'll be flush with the edge of the spool. Holes are 27mm deep into the spool, but I recommend 20-25mm screws max. Compatible with both AMS and AMS-lite!Prints without supports in about 2.5 hrs per each half in Bambu ABS. Should be compatible with BambuLab refill spools
Category
3D Printer Accessories
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Medium confidence
Why?
no supports · 2 colors
Support-free Single piece 2 colors / AMS Hardware needed
Supports 0/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
ABS
Colors
2 (AMS/MMU recommended)
Est. print time
2.5 h
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Does Fast-print reusable spool AMS compatible V2 need supports when printing?
No supports needed for Fast-print reusable spool AMS compatible V2 — it's designed to print clean off the bed.
How long does it take to print Fast-print reusable spool AMS compatible V2?
According to the design notes, Fast-print reusable spool AMS compatible V2 takes approximately 2.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Fast-print reusable spool AMS compatible V2 available in?
Fast-print reusable spool AMS compatible V2 is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Fast-print reusable spool AMS compatible V2 free to download?
Yes, Fast-print reusable spool AMS compatible V2 is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
AMSlite spool Dry box，Easy to change filament
AMSlite spool Dry box，Easy to change filament
by 是成龙奥（Globle）
↓ 220 ♥ 72
AMS Lite Spool Holder for IKEA SKÅDIS
AMS Lite Spool Holder for IKEA SKÅDIS
by ProtoBit
↓ 17 ♥ 8
JAYO AMS LITE Adapter mit RFID
JAYO AMS LITE Adapter mit RFID
by Daniel Suhm
↓ 31 ♥ 7
Spool wall hang for AMS mini. for AMS spool claw
Spool wall hang for AMS mini. for AMS spool claw
by TRETTERMINATOR
Redline Cardboard Spool Adapter AMS Lite
Redline Cardboard Spool Adapter AMS Lite
by Doc M.
↓ 53 ♥ 4
Sunlu spool adapter/holder reusable for AMS RFID
Sunlu spool adapter/holder reusable for AMS RFID
by Sepp
↓ 33 ♥ 4
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection