Fast Shoes Organizer

This is not my first shoe organizer, but I wanted to create one that is much faster and much lighter!  In just 3 hours and with only 130gr, you will have an organizer ready to be used!  And the nice thing is that you can customize it as you like!  There are already 3 patterns in the file, but just change the type of filling in the modifiers, and you’re done!   HOW DOES IT WORKS???   For those using STL,  LOWER: you need to create a modifier of 245x130x3 that covers the entire base of the object and positioned at a height of 1.5mm.  UPPER: you need to create a modifier of 245x130x5 that covers the entire base of the object and positioned at a height of 2.5mm.    At this point you need to set 4 perimeters, 0 top layer, 0 bottom layer and the infill you want.   -- PRINTING PROBLEMS -- I know how frustrating it can be to have problems during a print, and I’m happy to receive constructive criticism or suggestions about the model, but please always calibrate the flow and if you have adhesion problems, try using the brim or a gripper. All these fails are not due to the model.  All my files are tested before being published and the print profile with which I succeed is the one I publish.  Thank you very much for your understanding and happy printing to everyone!