FC Barcelona HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 124.69x200mm in sizeFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Blue At layer #12 (1.04mm) swap to Red At layer #17 (1.44mm) swap to Yellow At layer #22 (1.84mm) swap to Jade White for the rest.