feed dispenser for birds

English
Since it has blown at the last Strum our feed dispenser for birds, by the wind, I have now times a self-constructed and adapted for two types of installation, it can be Hingestellt then you use the closed lid, or you can hang it with a M4 thread hook (Rigips ceiling hook with clamp) and two seals then, also for this is the fitting STL with it this has then a 4mm hole in the lid


Print settings:

Three files all threaded, so that it is modular printable the cylinder is 200mm high and 100mm in diameter, the bottom part requires a base print area of at least 235x235mm so it is still printable on the Ender 3 / 5

Layer height is 0.2mm all without support printable.

The material used here is PETG printed on the VzBot with 0.6 nozzle


Print times at 80mm/s, Infill 15%

Bottom 1h 32m

Cylinder 5h 46m

Lid 40m

German
Da es bei dem letzten Strum unseren Futterspender für Vögel, vom winde verweht hat, habe ich jetzt mal einen selbst Konstruiert und für zwei Ar