Fence pole brackets

These Brackets are for mounting a low wooden fence to a flat solid surface. Pole size 68x68mm and fence thickness up to 36mm. Normally I would choose ASA for outdoor aplications, but now I went for ABS-GF. ASA is not strong enough and ASA/CF is not flexible enough and both will break. ABS/GF is very strong, but still flexible enough to withstand the movement of the poles. It is not as good in UV protection as ASA, but still good enough to hold a long time. Read the next part carefully: Surface must be flat and solid (concrete, tiles or wood) Do not exceed 90cm in hight of the fence as it will catch too much wind and the bases might break. Make sure you have at least one corner for stability. Do not exceed 6m length without a corner piece. Do not use excesive power to tighten the screws as it might damage the print. Start with a corner piece and measure and fix one fence part at a time. There is little room for overdimensioning. Have fun! The printing of the pieces took a while, but aft