Thingiverse
Fender Tuner Nut Drill Guide
par taqTokToe
0
Téléchargements
0
Likes
0
Makes
Made for accurate drilling / spacing of the tuner holes on telecaster style headstock when using Wilkinson JN05LLocking tuners. 10mm dia x 24.5mm spacing.
You will need the jig and 2x locator pegs
Position using the lip on the jig, drill one of you E tuners, push in a locator peg, drill the other E tuner, push in the second locator peg. Now drill the other holes.
I made the jig quite thick as i wanted it to act as a bit of a drill guide too.
Its a one shot tool at the moment as the 10mm holes are a tight fit but worked a treat.
You will need the jig and 2x locator pegs
Position using the lip on the jig, drill one of you E tuners, push in a locator peg, drill the other E tuner, push in the second locator peg. Now drill the other holes.
I made the jig quite thick as i wanted it to act as a bit of a drill guide too.
Its a one shot tool at the moment as the 10mm holes are a tight fit but worked a treat.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
