Festool RO 150 Disc Sander Conversion

These parts are used to create a mounting plate for my Festool Rotax sander (RO150) and set it up as a disc sander. Parts I used to complete: 4 of M8 x 20mm Round/Button head bolts (for attaching the RO150 to the bracket)2 of M8 Washers 4 x Kreg 50mm Screws 5 x Kreg 32mm Screws You don't need Kreg screws, but all the holes have were designed around these (as I have lots of them). Key dimensions are:5 mm diameter for mounting screw shafts10 mm diameter for the mounting screw heads23 mm diameter for the M8 washers13mm diameter for the M8 headsTo assemble: Mark out where to place the main bracket on a piece of timber, screw down at the front with 32mm screws and then at the back with 50mm screws (there are more holes than needed)Use the bracket as a guide to mark/drill an 8mm hole into the base of the wood. There is a mini version of the bracket in the print file which can be used for marking.Remove the main bracket from the timber and drill out the 8mm hole to 13+mm (so that the head