FF1 Crawl Refrigerator Magnet

CrawlThis is a HueForge of the monster Crawl from Final Fantasy 1 for NES, stacked on a base with holes for magnets. Magnet Size: 6 x 2mm If you want to use a different magnet diameter, resize the discs in the project file to .04mm larger than your magnet. For example, if you have 5mm magnets, resize the discs to 5.04 x 5.04 x 2mm. The magnets should stay by friction, but, if you're having trouble, a dab of glue will suffice. HueForge details:Project: FF!_Crawl.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 70x70mm in size Filaments Used: #000000 PLA Sunlu Black Transmission Distance: 0.3 #695fa2 PLA Anycubic Purple Opulence Transmission Distance: 2.7 #06924d PLA PolyLite Green Transmission Distance: 1.3 #ffffff PLA+ Anycubic Brilliant White Transmission Distance: 1This print uses 4 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Purple Opulence At layer #17 (1.44mm) swap to Green At layer #21 (1.76m