Thingiverse
FFI Teslaturbine
por sliptonic
0
Descargas
0
Likes
0
Makes
In my book [FreeCAD for Inventors](https://www.amazon.com/FreeCAD-Inventors-Practical-Examples-Descriptions-ebook/dp/B07H9RV5X6/ref=sr_1_11?dchild=1&keywords=freecad&qid=1632754557&sr=8-11), I show the design process for a simple teslaturbine.
This Thing is an improved version of that design.
It consists of 3 3D printable parts:
Main housing (1)
Sidecaps (2)
Hubs (8)
You'll also need
608 Skate Bearings (2)
Salvaged Hard drive platters (4)
5/16" or 8mm bolt for the axle (1)
5/16" or 8mm nut for axle (2)
4mm x 45mm hex head cap screw (4)
4mm nut (4)
5/16" washers (~1.25mm thick) (4)
https://youtu.be/CkwQkjlsBfU
This Thing is an improved version of that design.
It consists of 3 3D printable parts:
Main housing (1)
Sidecaps (2)
Hubs (8)
You'll also need
608 Skate Bearings (2)
Salvaged Hard drive platters (4)
5/16" or 8mm bolt for the axle (1)
5/16" or 8mm nut for axle (2)
4mm x 45mm hex head cap screw (4)
4mm nut (4)
5/16" washers (~1.25mm thick) (4)
https://youtu.be/CkwQkjlsBfU
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!