Thingiverse

Fidget Spinner With M6 Nuts

von Jogvan_Flores

79 Downloads

57 Likes

1 Makes

This is a Fidget Spinner i made so i could get different color. and to use with M6 nuts. The reason why i used 3 small nuts in every arm, insted of a big M10 or M12. is Beacuse.. Then you can hide them (Pretty good) and only have the Bearing in the middle showing. The Spinner is 7mm tall, and Standard M6 nuts are 5,1mm tall. So i made the Covers 0,9mm tall.
I sanded mine to get rid of the "3D printing lines" so the top is nice smooth.
How to glue it: I lined the two pieces up useing the nuts. fx. i press in the nuts in the middle part (The blue part) and then i add glue to the top/bottom part, and press it in. Then i let is sit for 10-15 sec, and then quickly push out the nuts. Then let the part fully dry. repeat on the other side. the Covers are just press fit. but i glued everything together.

I have uploaded 3 files:
"fidgetspinner_m6_bottom_1.stl" Is the Top and the Bottom of the print (See the pictures above)
"fidgetspinner_m6_middle_1.stl" Is the Middle of the print (See t

ADHD Adhd Edc Everydaycarr everydaycarry every day carry fidget Fidgetspinner fidget spinner Focustool Focus Tool Focus toy spinner Stress stress relief toy ADHD Adhd Edc Everydaycarr everydaycarry every day carry fidget Fidgetspinner fidget spinner Focustool Focus Tool Focus toy spinner Stress stress relief toy ADHD Adhd Edc Everydaycarr everydaycarry every day carry fidget Fidgetspinner fidget spinner Focustool Focus Tool Focus toy spinner Stress stress relief toy

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Warum?

aufwändige Nachbearbeitung

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 3/3

Drucker