Slicer Discord
3DSEARCH / Cosplay Weapons / Fidget Spinning Finger Throwing Star
Fidget Spinning Finger Throwing Star – 3D printable model from MakerWorld MakerWorld
Cosplay Weapons

Fidget Spinning Finger Throwing Star

by ProtoDad · Cosplay Weapons
1.9k Downloads
668 Likes
1.3k Makes
Go to Model
This is finally the finger spinner version of the Demon wind shuriken. It is my favorite spinner by far. It spins the best and it prints like a dream. At only 3 hours and under 40 grams of material, this is the perfect spinner for anyone! It has custom finger pieces as well. If you have smaller fingers you can print the one that fits best, Move to plate 5, center the ring on the plate, and merge with the fidget spinner. Then print. Please let me know how everything turns out, this is my most tested model and by far my favorite!
Category
Cosplay Weapons
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Medium confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
50 mm (Small)
Est. print time
3 h
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

ProtoDad also publishes on

4 additional models across 1 more platforms

MakerOnline
4 models
♥ 835 ↓ 3,511
Verified by matching model titles across platforms.
Frequently Asked Questions
Which 3D printer is suitable for Fidget Spinning Finger Throwing Star?
Any FDM printer should handle Fidget Spinning Finger Throwing Star just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
How long does it take to print Fidget Spinning Finger Throwing Star?
According to the design notes, Fidget Spinning Finger Throwing Star takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Fidget Spinning Finger Throwing Star available in?
Fidget Spinning Finger Throwing Star is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Fidget Spinning Finger Throwing Star free to download?
Yes, Fidget Spinning Finger Throwing Star is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Naruto Kunai Common
Naruto Kunai Common
by Keruchi
↓ 209 ♥ 39
Demon Wind Shuriken V2
Demon Wind Shuriken V2
by ProtoDad
↓ 183 ♥ 91
Cosplay STL Download - Tobi Mask Cosplay Naruto - STL Fileby 3D Print Store STL
Cosplay STL Download - Tobi Mask Cosplay Naruto - STL Fileby 3D Print Store STL
Cosplay STL Download - Obito War Mask Cosplay Naruto - STL Fileby 3D Print Store STL
Cosplay STL Download - Obito War Mask Cosplay Naruto - STL Fileby 3D Print Store STL
Cosplay STL Download - Namikaze Minato Hiraishin Kunai Cosplay Naruto - STL Fileby 3D Print Store STL
Cosplay STL Download - Namikaze Minato Hiraishin Kunai Cosplay Naruto - STL Fileby 3D Print Store STL
Cosplay STL Download - Zabuza sword Cosplay Naruto Shippuden - STL Fileby 3D Print Store STL
Cosplay STL Download - Zabuza sword Cosplay Naruto Shippuden - STL Fileby 3D Print Store STL
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection