Filament Box Drawer Hardware

I had so many empty boxes of filament from my NuBox membership and I didn't want to simply toss into recycling. Ended finding and printing an under desk drawer track. It worked well but I wanted to give the box a more finished look so I created this. This set includes both a drawer face and a drawer handle/knob. The face measures 230mm x 90mm If you print this please ensure you do not run the aux fan as it can likely cause warping You will need to use a drop of cyanoacrylate glue to put together the knob with the threads as well as a few drops on the drawer face to prevent it from rotating. You will also need an exacto knife or something that will allow you to cut a small hole into your cardboard filament box. Align your filament box on your track and use the drawer face to trace around the hole. Then after placing a few drops of glue to the back of the drawer face use the assembled handle and hex nut to clamp the drawer face to the filament box. I am using the following for the dr