Filament Drybox Connector

Little Connector to attach a Bowden Tube Connector to a Drybox. The Coupler is the one that needs an 8mm Hole, (BEWARE, there are different versions), the Threads are M6. (Picture below)Material: PETG, if your Drybox doesnt get too hot, you might get away with PLA.Support removal: Push support trough the hole with a small allen/hex Key or with a piece of filament. Should come out as one piece.Assembly: You will need to drill the 8mm Hole. The Printed part should screw in with some force (make sure its straight). If not, heat it up a bit and dry fit, before screwing it to the box.