Thingiverse
Filament Fuser Block
door MechEngineerMike
562
Downloads
383
Likes
2
Makes
The Filament Fuser Block enables you to securely fuse two ends of 3D printing filament together in roughly 10 seconds. With this tool you can recycle leftover filament, extend the length of your filament spools for long prints, and add color changes to your prints!
The printed parts enable you to safely hold the heated block under a hinged guard, and clamp everything to the side of a table. It works on 2.85mm and 1.75mm filament in any printing material. The Fuser Block is controlled by plugging the (3) two-pinned connectors into your existing 3D printer controller, so you can precisely control the temperature!
These 3D printing models are shared here for free, but to complete the assembly you'll need the associated hardware kit from the EngineerDog Store here: https://engineerdog.com/store/filament-fuser/
Complete assembly and use instructions available on 3D Printing.com here: http://3dprinting.com/how-to/fuse-filament-home/... See image attached for recommended print settin
The printed parts enable you to safely hold the heated block under a hinged guard, and clamp everything to the side of a table. It works on 2.85mm and 1.75mm filament in any printing material. The Fuser Block is controlled by plugging the (3) two-pinned connectors into your existing 3D printer controller, so you can precisely control the temperature!
These 3D printing models are shared here for free, but to complete the assembly you'll need the associated hardware kit from the EngineerDog Store here: https://engineerdog.com/store/filament-fuser/
Complete assembly and use instructions available on 3D Printing.com here: http://3dprinting.com/how-to/fuse-filament-home/... See image attached for recommended print settin
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
