Thingiverse
Filament guide Prusa MK2
por arabon
38
Descargas
32
Likes
0
Makes
I created this filament guide for my Prusa i3 MK2 with ball bearing 608 pully guides for minimum friction of my filament
You can find the ball bearing guide pully here at banggood
https://www.banggood.com/5Pcs-30x8mm-U-Plastic-Embedded-608-Groove-Ball-Bearings-Guide-Pulley-p-1097537.html
Print the filament guide bearing with raft and support on his side on 0.2 layer height. The caps and rods with skirt on 0.1 layer height. Also you have to trim the inside of the caps a little bit for a good fit. (protrusions)
You can find the ball bearing guide pully here at banggood
https://www.banggood.com/5Pcs-30x8mm-U-Plastic-Embedded-608-Groove-Ball-Bearings-Guide-Pulley-p-1097537.html
Print the filament guide bearing with raft and support on his side on 0.2 layer height. The caps and rods with skirt on 0.1 layer height. Also you have to trim the inside of the caps a little bit for a good fit. (protrusions)
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
