Filament Holder 5000

The Filament Holder 5000 ( ¯\_(ツ)_/¯ ) is a filament spool holder for spools with a 38mm or 48mm center diameter. It easily holds up to one 1kg spool or two 250g or 500g spools. The spool cap for the spools are universally compatible between both types and are threaded. The supports and cross-arms press together; some post processing may be required. They will press together very tight and you may need to press them together on a hard level surface.You will need to print the Support_X2 file twice with organic (tree) supports. The rest do not need supports but I do recommend bed glue and no brim where you think is possible. I made this because the filament holder that came with my Anycubic Kobra 2 became weak and started sagging and twisting under the weight of a new spool.

WARNING: DO NOT over tighten the Spool Cap into the Spool. If you do, you risk breaking the threaded end of the cap into the threaded end of the spool. I did it and it is impossible to get the broken piece back