Filament Out Side On Sensor box Microswitch version

Filament Out Side On Sensor box Microswitch version

It is designed to have the filament feeding through from the sides.

Underside fitting of pnuematic passthrough fitting.

There is a "Not_10mm_Body_Filament_Out_Side_On_Sensor_box_Button_Microswitch.stl"
which has no 10mm Boden fitting threads

This is for use with a microswitch with a lever arm. It is used to detect if the Filament has run out/snapped, etc..

Filamant Out Side On sensor box Microswitch improved
https://youtu.be/QyrHoiIPXOU

With the previous version Filament Out Side On Sensor box Microswitch it was a bit awkward to re-feed filament.

The lid generally needed removing and the filament need to be feed back through the hole in this lid and the over the top of the microswitch arm and then out through the other side.

With this Improved "Button" Version there is a button to press that pushes the lever on the mocroswitch so that the filament can be passed over the top of this microswith lever arm.

I