Filament rack/shelf

Heavy duty modular filament rack with only few wall mount screws for all rack/shelf. All parts can be printed by PLA. All parts can also be printed on A1 mini !!Boost MeThank you !For vertical wall mounts and one shelf you will need Total of: 4 x M4 x 30 (at least) screws with internal hex head2 x M4 X 20 (at least) screws with internal hex head6 x M4 nuts2 x M6 screws with hex head2 x M6 nuts8 x D6 screws and dowels (or 10 if you need middle stiffener)wooden rod with a diameter of 25 mm4 x 3,5 mm self-tapping screw (optional) I highly recommend using my pre-sliced files. 1. Print One set of horizontal shelf V1 or V2 (choose one) with adapters and during the print insert two M4 nuts (pause is added at layer 109) Note: adapters can be printed with PLA also, but due to long-term static loading and susceptibility to creep, a material that does not creep as significantly as PLA (e.g. PC) is most suitable2. Print One set of vertical wall mounts and insert two M6 nuts during the print (pause